//========= Copyright Valve Corporation, All rights reserved. ============// // // Purpose: // // $NoKeywords: $ // //=============================================================================// #ifndef P5P6PERFORMANCECOUNTERS_H #define P5P6PERFORMANCECOUNTERS_H // defined for < Pentium 4 //--------------------------------------------------------------------------- // Format of the performance event IDs within this header file in case you // wish to add any additional events that may not be present here. // // BITS 0-8 Unit Mask, Unsed on P5 processors // BIT 9 Set if event can be set on counter 0 // BIT 10 Set if event can be set on counter 1 // BITS 11-15 Unused Set to zero // BITS 16-23 Event Select ID, Only bits 16-21 used on P5 Family // BITS 24-27 Unused set to zero // BITS 28-32 Process family that the event belong to, as returned by // the CPUID instruction. //--------------------------------------------------------------------------- //--------------------------------------------------------------------------- // PENTIUM PERFORMANCE COUNTERS. //--------------------------------------------------------------------------- #define P5_DTCRD 0x50000300 //Data Cache Reads #define P5_DWRIT 0x50010300 //Data Cache Writes #define P5_DTTLB 0x50020300 //Data TLB Miss #define P5_DTRMS 0x50030300 //Data Read Misses #define P5_DWRMS 0x50040300 //Data Write Miss #define P5_WHLCL 0x50050300 //Write (Hit) to M- or E-state line #define P5_DCLWB 0x50060300 //Data Cache Lines Written Back #define P5_DCSNP 0x50070300 //External Snoops #define P5_DCSHT 0x50080300 //Data Cache Snoop Hits #define P5_MAIBP 0x50090300 //Memory Access in Both Pipes #define P5_BANKS 0x500A0300 //Bank Conflicts #define P5_MISAL 0x500B0300 //Misaligned Data Memory Reference #define P5_COCRD 0x500C0300 //Code Cache Reads #define P5_COTLB 0x500D0300 //Code TLB Misses #define P5_COCMS 0x500E0300 //Code Cache Misses #define P5_ANYSG 0x500F0300 //Any Segment Register Loaded #define P5_BRANC 0x50120300 //Branches #define P5_BTBHT 0x50130300 //BTB Hits #define P5_TBRAN 0x50140300 //Taken Branch or BTB hit #define P5_PFLSH 0x50150300 //Pipeline flushes #define P5_INSTR 0x50160300 //Instructions Executed #define P5_INSTV 0x50170300 //Instructions Executed in the V-Pipe (Pairing) #define P5_CLOCL 0x50180300 //Bus active #define P5_PSDWR 0x50190300 //Full write buffers #define P5_PSWDR 0x501A0300 //Waiting for Data Memory Read #define P5_NCLSW 0x501B0300 //Clocks stalled writing an E or M state line #define P5_IORWC 0x501D0300 //I/O Read or Write Cycle #define P5_NOCMR 0x501E0300 //Non-Cacheable Memory Reads #define P5_PSLDA 0x501F0300 //Clocks stalled due to AGI #define P5_FLOPS 0x50220300 //Floating Point Operations #define P5_DBGR0 0x50230300 //Breakpoint match on DR0 #define P5_DBGR1 0x50240300 //Breakpoint match on DR1 #define P5_DBGR2 0x50250300 //Breakpoint match on DR2 #define P5_DBGR3 0x50260300 //Breakpoint match on DR3 #define P5_HWINT 0x50270300 //Hardware interrupts #define P5_DTRWR 0x50280300 //Data reads or writes #define P5_DTRWM 0x50290300 //Data read or write miss #define P5_BOLAT 0x502A0100 //Bus ownership latency #define P5_BOTFR 0x502A0200 //Bus ownership transfer #define P5_MMXA1 0x502B0100 //MMX Instruction Executed in U-pipe #define P5_MMXA2 0x502B0200 //MMX Instruction Executed in V-pipe #define P5_MMXMS 0x502C0100 //Cache M state line sharing #define P5_MMSLS 0x502C0200 //Cache line sharing #define P5_MMXB1 0x502D0100 //EMMS Instructions Executed #define P5_MMXB2 0x502D0200 //Transition from MMX to FP instructions #define P5_NOCMW 0x502E0200 //Non-Cacheable Memory Writes #define P5_MMXC1 0x502F0100 //Saturated MMX Instructions Executed #define P5_MMXC2 0x502F0200 //Saturations Performed #define P5_MMXHS 0x50300100 //Cycles Not in HALT State #define P5_MMXD2 0x50310100 //MMX Data Read #define P5_MMXFP 0x50320100 //Floating Point Stalls #define P5_MMXTB 0x50320200 //Taken Branches #define P5_MMXD0 0x50330100 //D1 Starvation and FIFO Empty #define P5_MMXD1 0x50330200 //D1 Starvation and one instruction in FIFO #define P5_MMXE1 0x50340100 //MMX Data Writes #define P5_MMXE2 0x50340200 //MMX Data Write Misses #define P5_MMXWB 0x50350100 //Pipeline flushes, wrong branch prediction #define P5_MMXWJ 0x50350200 //Pipeline flushes, branch prediction WB-stage #define P5_MMXF1 0x50360100 //Misaligned MMX Data Memory Reference #define P5_MMXF2 0x50360200 //Pipeline Stalled Waiting for MMX data read #define P5_MMXRI 0x50370100 //Returns Predicted Incorrectly #define P5_MMXRP 0x50370200 //Returns Predicted #define P5_MMXG1 0x50380100 //MMX Multiply Unit Interlock #define P5_MMXG2 0x50380200 //MOVD/MOVQ store stall, previous operation #define P5_MMXRT 0x50390100 //Returns #define P5_MMXRO 0x50390200 //RSB Overflows #define P5_MMXBF 0x503A0100 //BTB False entries #define P5_MMXBM 0x503A0200 //BTB misprediction on a Not-Taken Branch #define P5_PXDWR 0x503B0100 //stalled due MMX Full write buffers #define P5_PXZWR 0x503B0200 //stalled on MMX write to E or M state line #define P5_CLOCK 0x503F0300 //Special value to count clocks on P5 //--------------------------------------------------------------------------- // PENTIUM PRO / PENTIUM II PERFORMANCE COUNTERS. //--------------------------------------------------------------------------- #define P6_STRBB 0x60030300 //Store Buffer Block #define P6_STBDC 0x60040300 //Store Buffer Drain Cycles #define P6_MISMM 0x60050300 //Misaligned Data Memory Reference #define P6_SEGLD 0x60060300 //Segment register loads #define P6_FPOPE 0x60100100 //FP Computational Op. (COUNTER 0 ONLY) #define P6_FPEOA 0x60110200 //FP Microcode Exceptions (COUNTER 1 ONLY) #define P6_FMULT 0x60120200 //Multiplies (COUNTER 1 ONLY) #define P6_FPDIV 0x60130200 //Divides (COUNTER 1 ONLY) #define P6_DBUSY 0x60140200 //Cycles Divider Busy (COUNTER 1 ONLY) #define P6_L2STR 0x60210300 //L2 address strobes => address bus utilization #define P6_L2BBS 0x60220300 //Cycles L2 Bus Busy #define P6_L2BBT 0x60230300 //Cycles L2 Bus Busy transferring data to CPU #define P6_L2ALO 0x60240300 //L2 Lines Allocated #define P6_L2MAL 0x60250300 //L2 M-state Lines Allocated #define P6_L2CEV 0x60260300 //L2 Lines Evicted #define P6_L2MEV 0x60270300 //L2 M-state Lines Evicted #define P6_L2MCF 0x60280301 //L2 Cache Instruction Fetch Misses #define P6_L2FET 0x6028030F //L2 Cache Instruction Fetches #define P6_L2DRM 0x60290301 //L2 Cache Read Misses #define P6_L2DMR 0x6029030F //L2 Cache Reads #define P6_L2DWM 0x602A0301 //L2 Cache Write Misses #define P6_L2DMW 0x602A030F //L2 Cache Writes #define P6_L2CMS 0x602E0301 //L2 Cache Request Misses #define P6_L2DCR 0x602E030F //L2 Cache Requests #define P6_DMREF 0x60430300 //Data Memory References #define P6_DCALO 0x6045030F //L1 Lines Allocated #define P6_DCMAL 0x60460300 //L1 M-state Data Cache Lines Allocated #define P6_DCMEV 0x60470300 //L1 M-state Data Cache Lines Evicted #define P6_DCOUT 0x60480300 //L1 Misses outstanding #define P6_TSMCD 0x60520300 //Time Self-Modifiying Code Detected #define P6_BRWRA 0x60600300 //External Bus Cycles While Receive Active #define P6_BRDCD 0x60600300 //External Bus Request Outstanding #define P6_BRBNR 0x60610300 //External Bus Cycles While BNR Asserted #define P6_BUSBS 0x60620300 //External Bus Cycles-DRDY Asserted (busy) #define P6_BLOCK 0x60630300 //External Bus Cycles-LOCK signal asserted #define P6_BBRCV 0x60640300 //External Bus Cycles-Processor receiving data #define P6_BURST 0x60650300 //External Bus Burst Read Operations #define P6_BRINV 0x60660300 //External Bus Read for Ownership Transaction #define P6_BMLEV 0x60670300 //External Bus Writeback M-state Evicted #define P6_BBIFT 0x60680300 //External Bus Burst Instruction Fetches #define P6_BINVL 0x60690300 //External Bus Invalidate Transactions #define P6_BPRBT 0x606A0300 //External Bus Partial Read Transactions #define P6_BPTMO 0x606B0300 //External Bus Partial Memory Transactions #define P6_BUSIO 0x606C0300 //External Bus I/O Bus Transactions #define P6_BUSDF 0x606D0300 //External Bus Deferred Transactions #define P6_BUSTB 0x606E0300 //External Bus Burst Transactions #define P6_BMALL 0x606F0300 //External Bus Memory Transactions #define P6_BSALL 0x60700300 //External Bus Transactions #define P6_CLOCK 0x60790300 //Clockticks #define P6_BRHIT 0x607A0300 //External Bus Cycles While HIT Asserted #define P6_BRHTM 0x607B0300 //External Bus Cycles While HITM Asserted #define P6_BRSST 0x607E0300 //External Bus Cycles While Snoop Stalled #define P6_CMREF 0x60800300 //Total Instruction Fetches #define P6_TOIFM 0x60810300 //Total Instruction Fetch Misses #define P6_INTLB 0x60850300 //Instructions TLB Misses #define P6_CSFET 0x60860300 //Cycles Instruction Fetch Stalled #define P6_FTSTL 0x60870300 //Cycles Instruction Fetch stalled #define P6_RSTAL 0x60A20300 //Resource Related Stalls #define P6_MMXIE 0x60B00300 //MMX Instructions Executed #define P6_SAISE 0x60B10300 //Saturated Arithmetic Instructions Executed #define P6_PORT0 0x60B20301 //MMX micro-ops executed on Port 0 #define P6_PORT1 0x60B20302 //MMX micro-ops executed on Port 1 #define P6_PORT2 0x60B20304 //MMX micro-ops executed on Port 2 #define P6_PORT3 0x60B20308 //MMX micro-ops executed on Port 3 #define P6_MMXPA 0x60B30300 //MMX Packed Arithmetic #define P6_MMXPM 0x60B30301 //MMX Packed Multiply #define P6_MMXPS 0x60B30302 //MMX Packed Shift #define P6_MMXPO 0x60B30304 //MMX Packed Operations #define P6_MMXUO 0x60B30308 //MMX Unpacked Operations #define P6_MMXPL 0x60B30310 //MMX Packed Logical #define P6_INSTR 0x60C00300 //Instructions Retired #define P6_FPOPS 0x60C10100 //FP operations retired (COUNTER 0 ONLY) #define P6_UOPSR 0x60C20300 //Micro-Ops Retired #define P6_BRRET 0x60C40300 //Branch Instructions Retired #define P6_BRMSR 0x60C50300 //Branch Mispredictions Retired #define P6_MASKD 0x60C60300 //Clocks while interrupts masked #define P6_MSKPN 0x60C70300 //Clocks while interrupt is pending #define P6_HWINT 0x60C80300 //Hardware Interrupts Received #define P6_BTAKR 0x60C90300 //Taken Branch Retired #define P6_BTAKM 0x60CA0300 //Taken Branch Mispredictions #define P6_FPMMX 0x60CC0301 //Transitions from Floating Point to MMX #define P6_MMXFP 0x60CC0300 //Transitions from MMX to Floating Point #define P6_SIMDA 0x60CD0300 //SIMD Assists (EMMS Instructions Executed) #define P6_MMXIR 0x60CE0300 //MMX Instructions Retired #define P6_SAISR 0x60CF0300 //Saturated Arithmetic Instructions Retired #define P6_INSTD 0x60D00300 //Instructions Decoded #define P6_NPRTL 0x60D20300 //Renaming Stalls #define P6_SRSES 0x60D40301 //Segment Rename Stalls - ES #define P6_SRSDS 0x60D40302 //Segment Rename Stalls - DS #define P6_SRSFS 0x60D40304 //Segment Rename Stalls - FS #define P6_SRSGS 0x60D40308 //Segment Rename Stalls - GS #define P6_SRSXS 0x60D4030F //Segment Rename Stalls - ES DS FS GS #define P6_SRNES 0x60D50301 //Segment Renames - ES #define P6_SRNDS 0x60D50302 //Segment Renames - DS #define P6_SRNFS 0x60D50304 //Segment Renames - FS #define P6_SRNGS 0x60D50308 //Segment Renames - GS #define P6_SRNXS 0x60D5030F //Segment Renames - ES DS FS GS #define P6_BRDEC 0x60E00300 //Branch Instructions Decoded #define P6_BTBMS 0x60E20301 //BTB Misses #define P6_RETDC 0x60E40300 //Bogus Branches #define P6_BACLR 0x60E60300 //BACLEARS Asserted (Testing) // INTEL #define PENTIUM_FAMILY 5 // define for pentium #define PENTIUMPRO_FAMILY 6 // define for pentium pro #define PENTIUM4_FAMILY 15 // define for pentium 4 // AMD #define K6_FAMILY 5 #define K8_FAMILY 6 #define EXTENDED_FAMILY 15 // AMD 64 and AMD Opteron #endif // P5P6PERFORMANCECOUNTERS_H